6ERROR: Two or more fields overlap in current settings
Please REDO ...U
Enter new Start-Column:
Enter new size: U
MENU 1a1
Set:
<ESC> to abort
Enter new
MENU 1a2#
catalog Filename:
active Def-file:
auto-disk Name:
ON
OFF
Title screen:
Category:
auto-Sort:
Method:
Archive-read: 8 Locations and names of extractors and viewing utility :
1. Viewing util -
2. 'ARC' util -
3. 'ZOO' util -
4. 'ZIP' util -
5. 'LZH' util -
6. 'PAK' util -
7. Scratch path -
8. Target drive -
default DEF file name
default CATALOG file name2disk name for AUTOMATIC numbering of VOLUME LABELS
file VIEWING utility w/path
ARC extraction utility w/path
ZOO extraction utility w/path
ZIP extraction utility w/path
LZH extraction utility w/path
PAK extraction utility w/path
SCRATCHPAD path
default TARGET driveU
=D u
=F!u
=N1u
"=8 u
MENU 1a
Colors:U
=D u?
=M2u>
. G ^ t
( 8 B L [ k u
!'!7!A!K!Z!j!y!~!
"%"z"
#2#V#z#
$L$n$
%6Printer Set Up String (enter "*" to change ... )
<ESC> to abort
<ERROR>
<NONE>
Print Catalog
Is printer ready?
CAUTION!-Enter set-up string to be sent to printer ->
Printing ...
<ESC> to abort
U
=D u#
CATALOG LIST of
DATE:
Page
Filename
Volume
Free Space
Comments
Category
press <ESC> to abort printing
bytes of Free Space
4 L b l v
- PRINTER NOT READY -... please fix and press any key to continue.U
Previous operation was aborted U
$TOO LITTLE MEMORY FOR THIS OPERATIONU
Mem Free:
U
*** CORRUPTED ARCHIVE ***
ERROR - contents of
not catalogedU
ERROR - contents of
not catalogedU
*** CORRUPTED ARCHIVE ***
Unable to read contents of
, however
is cataloged.U
\&*** THIS LZH FILE MAY BE CORRUPTED ***
ERROR - contents of
not catalogedU
*** CORRUPTED ARCHIVE ***
ERROR - contents of
not catalogedU
PRINTER_SETUP_STRINGU
File not found
Path not found
Too many open files
Access denied
Invalid drive
Disk read error
Disk write error - Disk Full ?
Improper numeric format
Disk is write protected
Unknown unit
Drive not ready
Unkown command
CRC error in data"Bad drive request structure length
Disk seek error
Unknown media type
Sector not found
Printer out of paper
Device write fault
Device read fault
Hardware failure
Division by zero
Unrecognized Error
* Correct and press any key to continue ...U
<no volume label>
Updating volume...U
Renumbering Volume...U
Writing label to disk
Volume relabel process failed
Volume label write failedU
This volume has no label
Current volume label is 'Enter a new label name or press <ENTER>
to generate a unique label:
=@Label not valid .. only ~!@#$%^&().{}' and alphabetic characters
Write label to disk? (Y/N)
*,Enter COMPLETE PATH to be assigned as VOLUME
Reading Volume in drive
Volume :
Directory:
Volume
already exists.
U: Update
L: (re)Label diskette in drive
N: reNumber catalog entry
Disk #
U: Update Disk #
anyway.
Disk number ->
Disk #:
<no label>U
Read disks into catalog
Catalog file :
Last Vol. Read:
Source drive :
; To assign a number to the disk just begin typing it. Menu UPC
Category:
Disk #: .Press <ENTER> to begin reading source diskette
Method:
Disk Numbers:
Exclude mask:
Include mask:
Archive read:
Duplicates NOT Allowed
Duplicates Allowed Inactive Active
Disk number ->
=* u<
Write Catalog to disk
Alt-C to clear or <ENTER> to accept:
->
Writing catalog to disk...U
<ESC> to abort.
Changes have been made to the current
catalog-- do you wish to save it to disk
before continuing?
( NOT ENOUGH MEMORY TO READ THIS CATALOG U
<ESC> to abort.
Read Catalog from disk
Alt-C to clear or <ENTER> to accept:
->
Path not found
No matching files
Insufficient memory
Dos critical error
Reading catalog from disk...
New File? U
? e
* E ` {
!4!I!`!j!t!
"!#-#@#[#x#
%#%B%L%Z%
%6&I&_&{&
','1'?'h'
(*(6(R(^(z(
)-)T)k)t)
*5*=*B*
,&,+,P,X,],r,
,#-3->-P-U-g-
-Z.i.
0'010?0
1d1z1
3'3;3@3T3a3f3
4&4<4R4h4~4
505S5]5b5p5
6"626=6G6U6g6y6
9#9(979M9o9~9
:):.:9:K:P:Y:
;#;;;_;o;
<#<5<E<P<U<_<r<
=+=8=E=R=W=b=t=
=:>L>Q>e>}>
?1?F?[?p?
C.CBCbCmC
D!D5DID]DqD
E-E<ELE^E~E
F*F>FRFfFzF
G"G1GCGHGSGlGtGyG
H!H7HRHhH
I&I3IDIYI
I6JuJ
K%K9KYKhK|K
LWLiLnL|L
M#MCMRMlM
N)N9N>NONYN^N
P+P7PCPPPUP
RBRYRrR
S%S6SGSUS^SqS
S+TNTWTjT|T
W-WFW_WxW
W$XAX\X
Y!Y2Y7Y~Y
[2\O\T\i\n\
](]A]S]\]o]
^1^D^W^e^
_._P_U_q_v_
`%`4`>`C`{`
ABCDEFGHIJKLMNOPQRSTUVWXYZU
G w d
&:E t
.PAKU
New Category
input new category ->
E S b s
Ver 5.3
PLUS
&
by Patrick Michaud & & William C. Scott
14 Mar., 1990 $ Copyright 1990 by William C. Scott MPmCat PLUS is a file cataloging/browsing utility. ARC, ZIP, ZOO, PAK and LZHMfiles are accepted. A utility for converting data files from the older PmCatMformat is sent to registered users. License fee is $20 sent to address below.
Use 'H' or <F1> for Help(Notice: By using this program, you agree(that neither Patrick Michaud nor William(C. Scott may be held liable for damages,(direct or consequential that might arise
from its use.
Notice:
Serial #: 0390.001
William C. Scott
P.O. Box 474
Coalgate, OK 74538
Press any key to continueU
<ENTER> =
file ->
PRINTER_SETUP_STRINGU
PMXCAT.DEF PMCAT.CAT PMCAT.LST
<none>
.ASCU
View4View files, volumes and comments. Add/edit comments.
UpdateDUpdate current catalog. Add, replace volumes. Comments will be kept.
ReadIRead new catalog from disk. You will erase the current catalog in memory.
WriteLSave current catalog in memory to disk. It will remain in memory afterwards.
<ESC>&Exit PmCat. Return to calling program.
Colors+Set screen, window and selector bar colors.
Def&file-Change default paths, filenames and switches.
Mask-setEReview and/or change the filemasks PmCat uses when MASK is set to ON.
set-Printing
Set format for hardcopy output.
Read-defaults(Read in default settings from disk file.
Write-defaults*Save the current default settings to disk.
Return to MENU 1.
FileAPlace the name you wish to use as a default for the catalog name.
Def-fileJSet the name of the file in which the present default settings are stored. auto-Name=Name you wish to use on automatically numbered volume labels.
1EFull pathname of utility you will use to view files (LIST,TYPE, etc.)
2?Full pathname of utility you will use for extracting ARC files.
3?Full pathname of utility you will use for extracting ZOO files.
4?Full pathname of utility you will use for extracting ZIP files.
5?Full pathname of utility you will use for extracting LZH files.
6?Full pathname of utility you will use for extracting PAK files.
7ODrive/directory to use as a scratch pad when extracting/viewing archived files.
8DDefault TARGET drive ... drive on which PmCat looks for the archive. auto-Sort8Set to ON for automatic sorting of files before viewing.
Archive-read=Set to ON to enable the reading of archived file directories.
Title-screenKSet the opening title screen to appear (ON) or skipped upon running (OFF).
Return to MENU 1a.
Increment the item selected.
Decrement the item selected.
Return to MENU 1a1.
ACCEPT9Accept the volume letter shown above read the file there.MOFF-disables, AUT-automatic incrementing of number, MAN-you enter each numberJAccept current mask settings and return to previous menu. Same as <ENTER>.5Use Up arrow key to move bar cursor in window upward.9Use Down arrow key to move bar cursor in window downward.
9Use Left arrow key to move bar cursor in window sideways.
:Use Right arrow key to move bar cursor in window sideways.
ExcludeFToggle Exclude list ON/OFF. "EXCLUDES" files matching these filemasks.
IncludeEToggle Include list ON/OFF. "INCLUDES" files matching these filemasks
Clear-Clear item indicated by bar cursor in window.
Clear item and input new value.
Return to MENU 1aKAccept current print settings and return to previous menu. Same as <ENTER>.
Move the selector bar upward.
Move the selector bar downward.'Clears the item highlighted by the bar.
Delete volumeKPick the volume to delete from the list in the window, using the arrow key.
Return to MENU 1
!Move backward one page (12 files)%Move selector bar upward to next file
Dir@Display contents of volume, directory or archive (if cataloged).
Volumes#Display a list of volumes cataloged
CommentsNEnter comments for highlighted file. PG UP/DN to save & move to next/previous.
Find=Find a filename, volume free space or string within Comments.
NextMFind next occurrence of the string or free space for which you are searching.
SortLSort files according to your selection of filename, ext, size, date or path.
Edit"Edit hightlighted file in catalog.
Print
Print hardcopy of catalog.
"<"*Copy file comments into scratchpad buffer.
">"JCopy scratchpad buffer contents to comments of currently highlighted file.
Move forward one page (12 files)'Move selector bar downward to next file
<SPACE>IList file's contents through program you have specified in defaults area.
HOME+Move immediately to first entry in catalog.
END*Move immediately to last entry in catalog.
O-sys7Shell to DOS to execute another program of your choice.
KillIErase file from current catalog. Will show
DELETED
until saved to disk.
Limit8Limit display to category of highlighted file or volume.
Return to MENU 1 5Accept highlighted category make it the new category..Clear old category and replace with a new one.
Move selector bar upward.
Move selector bar downward.
Move selector bar left.
Move selector bar right. Filenames5Enter filename or filemask to find filename you want.;Enter string to search for in COMMENTS of files or volumes.
SizeJEnter a number. PmCat will find volumes with FREE SPACE greater than this.
soundeX
Soundex search filenames only
cateGory:Find first occurence of file with the category you select.
Abort this operation.
FilenameNSort items in window by filename. Volume labels are treated as filenames here. Extension"Sort items in window by extension.
Sort items in window by path.
Sort items in window by date.
Sort items in window by size.
Abort this procedure. Ascending'Sort with smallest first, largest last.
Descending'Sort with largest first, smallest last.
Abort procedure begun
Continue procedure begunKAccept current color settings and return to previous menu. Same as <ENTER>.)Move the color selector line to the left.*Move the color selector line to the right.
<Y>es - to printer ELooks OK go ahead and print. Don't forget to make sure printer is OK.
<D>isk - to disk file =Send output to ASCII text file on disk. Maybe print later ...
<N>o - abort operation
Don't wanna print. STOP
<*> - change print codes"Change printer set up code string.
Increment drive selection.
Decrement drive selection.
*2Enter a pathname as a volume. Useful on networks ?
#LChange volume label. Must select a drive first. Present label will be shown.
CATEGORIESMSelect and set to one of the predefined with arrow keys. <ESC> when finished.
METHODNSelect and use arrows to set a method for disk numbering. <ESC> when finished.
EXCLUDE Toggle the Excludemask function.
INCLUDE Toggle the Includemask function.
ARCHIVE$Toggle the archive reading function. NUMBERINGLTogggle allow duplicate disk numbers ON/OFF. (only a check, you may overide)
Abort this procedure. -Accept and read currently displayed filename."Activate pick list to choose from.1Accept and write to currently displayed filename.DUpdate current catalog. Commments will be kept. Old volume replaced.
Label.Change label and add this disk to the catalog.
Number3Change reference number in catalog for this entry. U
(.txt)